Vickers Tactical Carry Trigger VTCT-001 Gen 3-4

WARNING: Modifying of the Tango Down Trigger in any way may render the firearm unsafe. Modification of any factory trigger assembly component may also render the firearm unsafe and/or void any applicable warranties. Tango Down strongly recommends that this product be installed only by a GLOCK® certified gunsmith. Tango Down is not responsible for any violation of warranty or damages resulting from the use, modification or improper installation of this product. For use with GLOCK® Pistols only.

Refer to the Glock service manual for instruction on how to check for safe and proper function of the trigger assembly in the make and model of your firearm.

Important Note-

We highly recommend that this product be installed by a Certified Glock® Armorer. After any trigger work on your Glock®, trigger bar and firing pin engagement must be inspected and possibly adjusted to proper Glock® factory specification.

It is your responsibility as the weapon owner/user, to guarantee your weapon is safe to carry at all times.

OE Trigger Removal Tip 

Ask any professional Firearms Instructor about shooting well, and his/her first few sentences will have ‘trigger control’ in them. A quality trigger press, without shifting the weapon, will virtually guarantee you a hit on your target. If your sights were aligned, it’s a fundamental given.

Few controls on your pistol have the overall impact on successful shooting, as your trigger. This wasn’t lost on us in our search to make the Glock®, the best combat sidearm on the planet. This lead to our latest upgrade, the new VTCT Series- Vickers Tactical Carry Trigger.

Let’s start with the Flat Faced trigger shape. It’s popular among combat & competition shooters, and for good reason. With the large front surface and a low trigger safety, the shooter can gain maximum mechanical advantage. This gives the perceived feel of a lighter trigger press. Another benefit allows trigger movement straight back, without unconsciously ‘pushing’ the weapon to one side or another, as with some OE triggers.

Since there is no vertical ‘ridge’ in the middle of the trigger face to irritate your finger, shooting on the range all day becomes a lot more comfortable.

Function wise, we kept the mechanical take-up that most Glock® shooters have come to know and appreciate when they carry concealed. However, we shortened the over travel just a tick to get you back into reset quicker, for a faster follow-up shot if needed.

We then molded the entire trigger assembly in the exact same polymers used by Glock®, for the ultimate in reliability, durability and compatibility. All pivot pins are 17-4 Stainless Steel, and splined for maximum retention when assembled. Because we didn’t CNC machine any of the assembly in aluminum with the customary hard-coat anodize finish, the VTCT won’t ever get hot after a long training session. Our trigger is an insulator, not a heat conductor. It won’t abrade or create wear that damages the frame, possibly disabling the trigger safety. Since all of the geometry is molded in place, there are no set screws or adjustments to fail, leaving you with a dead weapon or one that ‘doubles’. The VTCT is easily installed in minutes by a Certified Glock® Armorer.

So, to recap, there are very few modifications you can perform to your pistol that will reward the effort as the VTCT Carry Trigger. Try one, see your accuracy improve and you won’t go back. Know that it is as rugged as your Glock®, and will always have your back.

Fits all Glock® Models, for Gen 3-4 Only

Fits Glock® Models 43, 43X & 48

• Flat face shape allows for proper, accurate trigger press

• Injection molded from same material as OEM factory trigger

• Won’t get hot, damage your pistol frame or lose adjustment

OA Length: 1.25″ Weight: 1.1 oz Made in the USA

TangoDown does NOT ship outside the United States